Electric Heavy Duty

1 Foot to 100 Feet 1.70 HEAVY DUTY Adhesive Lined Heat Shrink Tubing Marine 1FT

1 Foot to 100 Feet 1.70 HEAVY DUTY Adhesive Lined Heat Shrink Tubing Marine 1FT
1 Foot to 100 Feet 1.70 HEAVY DUTY Adhesive Lined Heat Shrink Tubing Marine 1FT
1 Foot to 100 Feet 1.70 HEAVY DUTY Adhesive Lined Heat Shrink Tubing Marine 1FT
1 Foot to 100 Feet 1.70 HEAVY DUTY Adhesive Lined Heat Shrink Tubing Marine 1FT
1 Foot to 100 Feet 1.70 HEAVY DUTY Adhesive Lined Heat Shrink Tubing Marine 1FT
1 Foot to 100 Feet 1.70 HEAVY DUTY Adhesive Lined Heat Shrink Tubing Marine 1FT
1 Foot to 100 Feet 1.70 HEAVY DUTY Adhesive Lined Heat Shrink Tubing Marine 1FT
1 Foot to 100 Feet 1.70 HEAVY DUTY Adhesive Lined Heat Shrink Tubing Marine 1FT
1 Foot to 100 Feet 1.70 HEAVY DUTY Adhesive Lined Heat Shrink Tubing Marine 1FT
1 Foot to 100 Feet 1.70 HEAVY DUTY Adhesive Lined Heat Shrink Tubing Marine 1FT
1 Foot to 100 Feet 1.70 HEAVY DUTY Adhesive Lined Heat Shrink Tubing Marine 1FT
1 Foot to 100 Feet 1.70 HEAVY DUTY Adhesive Lined Heat Shrink Tubing Marine 1FT

1 Foot to 100 Feet 1.70 HEAVY DUTY Adhesive Lined Heat Shrink Tubing Marine 1FT   1 Foot to 100 Feet 1.70 HEAVY DUTY Adhesive Lined Heat Shrink Tubing Marine 1FT
1 Foot to 100 Feet 1.70 HEAVY DUTY Adhesive Lined Heat Shrink Tubing Marine. Tubes come in 4 foot lengths so if you want 6 feet, you will receive one 4 foot rolled tube and one 2 foot rolled tube. Adhesive Lined Black Heat Shrink Tubing Marine Tool Grips Wiring. Sized right between 1 1/2" and 2" heat shrink tubing. Compare: this HEAVY DUTY heat shrink tubing weighs 2.7 oz per foot versus 0.5 for regular heat shrink tubing - that's more than 5X by weight! CANUSA 1.70 inch 43 mm Heat Shrink Cable Sleeves CFTV-1700. Adhesive lining for superior sealing against moisture, water and contaminants. Application Range 0.55 - 1.6 inch / 14.0 - 40.0 mm.

Expanded Internal Diameter 1.70 inch / 43.2 mm. Recovered Internal Diameter 0.50 inch / 12.7 mm. Maximum Total Wall Thickness 0.12 inch / 3.00 mm.

Will come in very handy for emergencies and those hard to fix repairs! This heavy duty heat sink requires the high heat from an electric heat gun or flame from a propane torch or similar. The propane torch works twice as fast as the heat gun yet you need not worry about burn-thru or melting as this heat sink material is very thick and durable - just keep the flame moving. Hair dryers or cigarette lighters will not shrink this wrap! Bonds to metals, wood, plastics, rubber, neoprene, polyethylene.

Surrounds round tubes, rectangular shapes, ropes, shapes having varying diameters. Irregular shaped components are not a problem. The adhesive is very similar to your standard polyurethane adhesive/sealants. Note this CFTV-1700 heat shrink tubing size can be used in place of other tubing sizes such as: CFTV-750, CFTV-1100, CFTV-1300, CFTV-1500 and even CFTV-2000 - depending on the use and the sizes of the components to be surrounded - see the table in the 3rd last photo for corresponding diameters and how they relate to the diameter range of CFTV-1700.

CFTV-1700 has a wide application range as it covers diameters in ranges 0.55 - 1.6 inch or 14.0 - 40.0 mm. In addition to regular cable and connector applications, here are other suitable applications. Grips: Perfect for tool handle grips - see my photos of actual hammer handles, clamp handle, wheelbarrow handles. Very grippy after it's shrink wrapped and it will not roll off or turn when twisted. Too many uses for this. Cable Repair Sleeve for Repair & Retrofit without Disconnecting: It even works like the CANUSA QuickSeal version of heat shrink wraparound flat sleeve without the need for disconnection or when the tube itself cannot be slipped over a thicker diameter section or end piece such as in retro-fitment and repairs or when interruption of service is not possible.

Refer to the 2nd last photo of the wraparound sleeve on the aluminum pole. Process: (1) cut tubing length required (2) slit lengthwise (3) wrap around components (4) heat and hold to fuse the closing end to form a closed tube (5) heat shrink the remaining portions to form a tight and waterproof fit.

Of course, due to the need for overlap, the max size of the component to be surrounded will be decreased. Marine, Automotive and Industrial Use. Wiring harnesses, industrial splices, breakouts and cable to connector lug transitions. Cord strain relief, waterproofing connections, abrasion resistance from friction causing interference, repairing weathered or damaged wires and connections. Repair heavy duty extension cords greater than 0.55 in diameter. Strain Relief and Leaking Hoses: Lastly, a sample of my repair on an 8 year old weathered and leaking GoodYear rubber air hose 5/8 outside diameter.

Since the tensile strength of this heat shrink is. 1500 psi and minimum 1100 psi when aged. Refer to the last photo with the red air hose.

Will be using more of this heat wrap as strain relief to reinforce other hose and cable ends before they die. I'll bet this stuff can be used as a temporary fix (or permanent fix) on a leaking copper or PEX pipe. What other uses might there be?? Environmentally Seals and Mechanically Protects.

Adhesive lining which flows when heated providing a waterproof seal for splice and connector mechanical protection. CFTV-1700 CATV-1700 Medium Wall Glue Lined Shrink Tubing. Shrink ratio is 67% or more in the radial direction. Continuous Operating Temperature: -55°C to 110°C. Thermochromatic lines change color to signal waterproof seal. Heat indicative paint ensures integrity of seal. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -.

Does not break at -55°C. Adhesive Peel Strength to PE. Adhesive Peel Strength to Aluminium. Adhesive Lap Sheer 1 in.

Water Penetration (50°C for 14 days). The item "1 Foot to 100 Feet 1.70 HEAVY DUTY Adhesive Lined Heat Shrink Tubing Marine 1FT" is in sale since Friday, March 3, 2017. This item is in the category "Business & Industrial\Electrical Equipment & Supplies\Wire, Cable & Conduit\Conduit & Tubing\Heat Shrink Tubing & Sleeves". The seller is "thekobans" and is located in Issaquah, Washington. This item can be shipped worldwide.

  • Model: CFTV-1700
  • Minimum Operating Temperature (Nominal): -55°C
  • Maximum Operating Temperature (Nominal): 110°C
  • Minimum Operating Temperature (Actual): -55°C
  • Maximum Operating Temperature (Actual): 110°C
  • Country/Region of Manufacture: Canada
  • Conduit Type: Heat Shrink Tubing
  • Sheath Color: Black
  • MPN: Does Not Apply
  • Brand: CANUSA


1 Foot to 100 Feet 1.70 HEAVY DUTY Adhesive Lined Heat Shrink Tubing Marine 1FT   1 Foot to 100 Feet 1.70 HEAVY DUTY Adhesive Lined Heat Shrink Tubing Marine 1FT